Astro Van M V6-262 4.3L VIN Z (1994)
Remove or Disconnect
1. Brake caliper.
2. Dust cap (17) from the hub.
3. Cotter pin (16), nut (18) and washer (19).
4. Rotor/hub (21) from the spindle on the steering knuckle. Do not damage spindle threads. Outer wheel bearing (20) will come off the spindle with
rotor/hub. The inner wheel bearing (22) remains inside the rotor/hub.
Inspect
1. Rotor braking surfaces for scoring, pitting, or cracks. Repair or replace as necessary.
2. Wheel bearings and races.
Install or Connect
1. Rotor/hub (21) on the spindle. Apply recommended high-temperature wheel bearing grease to the spindle and inside of rotor/hub before installing.
2. Outer wheel bearing (20) and washer (19). Apply a generous amount of the recommended high-temperature wheel bearing grease to the outer
wheel bearing.
3. Nut (18).
4. Adjust wheel bearing.
5. Cotter pin (16).
6. Brake caliper.