Avalanche 1500 2WD V8-5.3L (2008)
1. Install the park brake cable taking care to correctly route the cable through the guides and the body mounts.
2. Install the park brake cable to the backing plate by pressing the cable into place until the tabs lock into place.
3. Install the cable to the actuator lever.
4. Install the park brake cable to the track bar and secure in place with the clips. Verify the clips are installed between the locators on the track bar
(1500 series).
5. Position the park brake cable to the cable guides on the vehicle frame.
6. Install the park brake cable to the mounting bracket until the tabs lock into place.
