chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Electronic Brake Control Module Replacement (J92)|Page 16907 > < Electronic Brake Control Module Replacement (J92)|Page 16905

Avalanche 1500 2WD V8-5.3L (2008)

Page 3
background image

6. Remove all dirt and debris from the electronic brake control module (EBCM) and the brake pressure modulator valve (BPMV).
7. Disconnect the EBCM electrical connector.
8. Remove and discard the 4 EBCM screws (1).

9. Carefully pull the EBCM (1) from the BPMV.

Installation Procedure

Electronic Brake Control Module Replacement (J92)|Page 16907 > < Electronic Brake Control Module Replacement (J92)|Page 16905