Avalanche 1500 2WD V8-5.3L (2008)
Notice: Refer to Fastener Notice .
2. Working through the wheelhouse opening, install the engine mount to engine bolts (1).
Tighten the bolts to 50 N.m (37 lb ft).
3. Using the adjustable jack, lower the engine until the engine mount is sitting flush on the frame.
4. Remove the adjustable jack from the engine block.
5. Install the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .
6. Lower the vehicle.
7. Install the engine mount to frame bolts (1).
Tighten the bolts to 65 N.m (48 lb ft) starting with the middle bolt then either side bolt.
8. Install the generator bracket. Refer to Generator Bracket Replacement .
9. If the vehicle is equipped with 4WD, install the front drive axle. Refer to Differential Carrier Assembly Replacement (8.25 inch) Differential
