Avalanche 1500 2WD V8-5.3L (2008)
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 90 N.m (66 lb ft).
2. Tighten the bolt a final pass an additional 40 degrees using J 45059 .
10. Remove the EN 46330 .
11. Tighten the camshaft sprocket bolt
1. Tighten the bolt a first pass to 90 N.m (66 lb ft).
2. Tighten the bolt a final pass an additional 40 degrees using J 45059 .