Avalanche 1500 2WD V8-5.3L (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (1500 Series)
Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (1500 Series)
Removal Procedure
Notice: Refer to Heated Oxygen and Oxygen Sensor Notice.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Unbolt the front propeller shaft from the front differential, if equipped with four wheel drive (4WD). Refer to Front Propeller Shaft Replacement.
3. For vehicles equipped with a 4L60-E/4L70-E automatic transmission perform the following steps, for vehicles equipped with a 6L80-E automatic
transmission proceed to step 7.
4. Remove the connector position assurance (CPA) retainer.
5. Disconnect the engine wiring harness electrical connector (2) from the HO2S.
6. Remove the HO2S electrical connector clip (1) from the fuel line clip.