Avalanche 1500 2WD V8-5.3L (2008)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler Replacement (Without Hydroboost)
Power Steering Fluid Cooler Replacement (without Hydroboost)
Removal Procedure
1. Remove the fascia grille. Refer to Fascia Grille Replacement (Z71) Fascia Grille Replacement (Suburban, Tahoe) Fascia Grille Replacement
(Escalade) Fascia Grille Replacement (Yukon) Fascia Grille Replacement (GMC HP2) .
2. Remove the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement .
3. Remove as much power steering fluid as possible from the power steering fluid reservoir.
4. Place drain pans under the vehicle as needed.
Notice: Refer to Power Steering Hose Disconnected Notice .
5. Disconnect the power steering gear outlet hose (2) from the power steering fluid cooler (4).
6. Disconnect the power steering fluid cooler hose (3) from the power steering pump (1).
7. Remove the power steering fluid cooler bolts (2) from the power steering fluid cooler.
8. Remove the power steering fluid cooler from the vehicle.
Installation Procedure
1. Install the power steering fluid cooler to the vehicle.
