Avalanche 1500 2WD V8-5.3L (2008)
1. Position the axle housing cover (2) and the gasket (3) on the rear axle.
Notice: Refer to Fastener Notice .
2. Install the NEW axle housing cover bolts (1).
Tighten the axle housing cover bolts (1) to 40 N.m (30 lb ft).
3. Fill the rear drive axle with fluid. Refer to Rear Axle Lubricant Replacement (8.0/8.6 Inch Axle) (See: Fluid - Differential/Service and
Repair/Removal and Replacement/Rear Axle Lubricant Replacement (8.0/8.6 Inch Axle))Rear Axle Lubricant Replacement (10.5 Inch Axle) (
See: Fluid - Differential/Service and Repair/Removal and Replacement/Rear Axle Lubricant Replacement (10.5 Inch Axle)) .
4. Remove the support and lower the vehicle.