Avalanche 1500 2WD V8-5.3L (2008)
necessary.
10. Install the propeller shaft assembly. Refer to Rear Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair) .
11. Install the axle shafts. Refer to Rear Axle Shaft and/or Gasket Replacement (See: Drive Axles, Bearings and Joints/Seals and Gaskets/Service and
Repair/Rear Axle Shaft and/or Gasket Replacement) .
12. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair)
.
13. Inspect and add axle lubricant to the axle housing, if necessary. Refer to Rear Axle Lubricant Level Inspection (8.6 Inch Axle) (See: Fluid -
Differential/Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (8.6 Inch Axle))Rear Axle Lubricant Level Inspection (9.5LD
Inch Axle) (See: Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (9.5LD Inch Axle))Rear Axle Lubricant Level Inspection
(10.5 inch Axle) (See: Fluid - Differential/Service and Repair/Procedures/Rear Axle Lubricant Level Inspection (10.5 Inch Axle)) .
14. Remove the support and lower the vehicle.