Avalanche 1500 2WD V8-5.3L VIN T (2002)
Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENT
REMOVAL PROCEDURE
Under normal use, the battery in the transmitter will last about 2 years. For battery replacement, use a Panasonic 3 volt, type CR2032, or equivalent.
1. Open the transmitter case and perform the following steps:
1.1.
Insert a dime between the 2 halves of the transmitter near the key ring hole.
1.2.
Twist the dime.
2. Remove the battery.
INSTALLATION PROCEDURE
