Avalanche 1500 2WD V8-5.3L VIN T (2002)
1. Attach the foam pad to the frame.
2. Install the seat belt tower.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the bolts which retain the seat belt tower cover.
Tighten
Tighten the bolts to 1.9 N.m (17 lb in).
4. Install the rear cardboard panel. Engage the panel fasteners.
5. Install the seat back cover partially onto the top of the frame.
6. Feed the seat belt and the seat belt bezel through the tower opening.
7. Install the arm rest clip.
