Avalanche 1500 2WD V8-5.3L VIN T (2002)
Crankshaft Seal Retainer: Service and Repair
Engine Rear Cover Replacement
-
Tools Required
-
J41476 Front and Rear Cover Alignment (at crankshaft seal area)
Removal Procedure
1. Remove the engine flywheel.
2. Remove the oil pan-to-rear cover bolts (1).
3. Remove the rear cover bolts.
4. Remove the rear cover and gasket.
5. Discard the rear cover gasket.
6. Clean and inspect the rear cover.
Installation Procedure