Avalanche 1500 2WD V8-5.3L VIN T (2002)
2. Install the intake manifold.
3. Apply a 5 mm (0.20 inch) band of threadlock GM U.S. P/N 12345382, Canada P/N 10953489, or equivalent to the threads of the intake manifold
bolts.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the intake manifold bolts.
4.1.
Tighten the intake manifold bolts a first pass in sequence to 5 Nm (44 inch lbs.).
4.2.
Tighten the intake manifold bolts a final pass in sequence to 10 Nm (89 inch lbs.).
5. install the EVAP purge solenoid (3), isolator (1), and bolt (2) to the intake manifold.
-
Tighten the EVAP purge solenoid bolt to 10 Nm (89 inch lbs.).