Avalanche 1500 2WD V8-5.3L VIN T (2002)
3. Align the SIR steering wheel module coil (2) with the horn tower on the turn signal cancel cam (1).
4. Install the pre-centered SIR steering wheel module coil (2) to the steering column upper shaft.
5. Remove the centering tab (1) and discard.
NOTE: Gently pull on the lower coil assembly wire in order to remove any wire kinks inside of the column assembly. Verify that there are NO kinks
or bends in the SIR coil assembly wire. If a kink or bend is present interference may occur with the shaft lock mechanism. Turning the steering wheel
may cut or damage the wire.
6. Install the SIR steering wheel module coil retaining ring. Verify that the ring (1) is firmly seated in the groove on the upper shaft (2).
