chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Child Seat Tether Outer Hardware Kit|Page 10981 > < Child Seat Tether Outer Hardware Kit|Page 10979
Page 4
background image

EXTENDED CAB WITHOUT 2ND SEAT (AM7)

1. If you position the child seat in the front seat center, use the stud in the floor closer to the center of the vehicle.
2. If you position the child seat in the front seat right, use the stud in the floor closer to the side of the vehicle.

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID  See: Application and ID

Child Restraint Tether Anchor (AS3)

SUBURBAN WITH 3RD SEAT (AS3)

1. If you put the child seat in the 2nd seat center folding position or in the 2nd seat left folding position, use the 3rd seat center occupant lap belt latch

plate if the seat is unoccupied.

2. If you put the child seat in the 2nd seat right folding position, use GM P/N 15971501 in order to latch the tether to the 3rd seat buckle directly

behind this child seat position if the seat is unoccupied.

Child Seat Tether Outer Hardware Kit|Page 10981 > < Child Seat Tether Outer Hardware Kit|Page 10979