Avalanche 1500 2WD V8-5.3L VIN Z Flex Fuel (2005)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the trim panel screws (2,4,6).
Tighten
Tighten the trim panel screws (2,4,6) to 2 N.m (18 lb in).
4. Install the screw cover (5).
5. Install the push in fastener (3).
6. Install the manual lock lever to the trim panel.
1. Align the manual lock lever to the opening in the door trim panel.
2. Push inward until the manual lock lever is fully seated into the trim panel.
7. Install the door trim panel upper extension.
8. Install the door handle bezel.
Trim Panel Replacement - Upper Extension
Trim Panel Replacement - Upper Extension
Removal Procedure
1. Open the front door.
2. Release the upper extension by pulling outward on the front edge in order to release the upper retainer clips.
3. Remove the upper extension from the trim panel by lifting up and out.
Installation Procedure
1. Position the lower retainer to the trim panel.
2. Align the upper retainer clips to the door frame.
3. Press inward on the upper extension until the clips fully engage securing the panel to the door.
