Avalanche 1500 2WD V8-5.3L VIN Z Flex Fuel (2005)
Brake Pedal Assy: Service and Repair
Adjustable Pedal
BRAKE PEDAL ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the master cylinder from the brake booster and support with heavy mechanic's wire or equivalent. DO NOT disconnect the hydraulic
brake pipes from the master cylinder.
2. Remove the steering column from the vehicle.
3. Remove the transmission range selector cable support bolt from the instrument panel (I/P) reinforcement brace.
4. Remove the upper nut from the I/P reinforcement brace at the I/P.
5. Cut off the I/P reinforcement brace studs close to the I/P carrier. A replacement bracket, studs, and nuts are obtained in the service kit.
NOTE: Avoid damaging the surrounding components while cutting.
