chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Ball Joint|Testing and Inspection > < Tie Rod End|Service and Repair|Page 8886
Page 1
background image

Ball Joint: Specifications

Lower Ball Joint

The dial indicator reading should be no more than 2 mm (0.079 inch). If the reading is out of specification, replace the ball joint.

Upper Ball Joint

 The dial indicator reading should be no more than 2 mm (0.079 inch). If the reading is too high, replace the upper control arm.

Ball Joint|Testing and Inspection > < Tie Rod End|Service and Repair|Page 8886