Avalanche 1500 4WD V8-5.3L (2007)
9. Remove the fuel fill hose/pipe assembly.
10. Cap the open end of the fuel tank in order to prevent fuel system contamination.
11. Cap the open ends of the fuel/EVAP lines in order to prevent fuel/EVAP system contamination.
12. If replacing any serviceable part of the fill pipe assembly proceed to the disassemble procedure, otherwise proceed to the installation procedure.
DISASSEMBLE
-
Evaporative emission canister hose (1)
-
Evaporative emission canister hose clamp (2)
-
Fuel tank fill pipe clamp (3)
-
Fuel tank fill pipe housing bolts (4)
-
Fuel tank fill pipe housing (5)
-
Fuel tank fill pipe restrictor (6)
-
Fuel tank fill pipe clamp (7)
-
Fuel tank vent hose (8)
-
Fuel tank fill hose clamp (9)
-
Evaporative emission canister hose clip (10)
-
Fuel tank fill pipe (11)
-
Fuel tank fill hose clamp (12)
ASSEMBLE
-
NOTE: Refer to Fastener Notice.