Avalanche 1500 4WD V8-5.3L (2007)
1. Install the new boot clamp (1) onto the rack and pinion boot (2).
2. Prior to rack and pinion boot installation, apply grease to the inner tie rod assembly (2) and the rack and pinion gear assembly (1).
3. Install the rack and pinion boot (3) onto the inner tie rod assembly (2).
Important: The rack and pinion boot (3) must not be twisted, puckered or out of shape in any way. If the rack and pinion boot (3) is not
shaped properly, adjust the rack and pinion boot (3) by hand before installing the boot clamp.
4. Install the rack and pinion boot onto the gear assembly (1) until the rack and pinion boot (3) is seated in the gear assembly groove.
