Avalanche 1500 4WD V8-5.3L (2007)
10. Remove the lower control arm nuts and washers.
11. Remove the control arm bolts.
12. Remove the control arm.
Installation Procedure
1. Install the lower control arm.
2. Install the lower control arm bolts.
3. Install the washers.
Notice: Refer to Fastener Notice.
4. Install the lower control arm retaining nuts.
Tighten nuts to 175 N.m (129 lb ft).
5. Install the torsion bars.
6. Install the lower ball joint in the steering knuckle.
7. Install the wheel drive shaft.
8. Install the lower ball joint retaining nut.
Tighten nuts to 100 N.m (74 lb ft).
9. Install the shock module.
10. Install the stabilizer shaft links to the lower control arm.