Avalanche 1500 4WD V8-5.3L (2007)
1. Support the lower control arms at curb height.
2. Perform the following procedure before installing the bolts:
^
Remove all traces of the original adhesive patch.
^
Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
^
Apply threadlocker GM P/N 12345382 (Canadian P/N 10953489).
3. Install the link assemblies.
4. Install the link bolts.
Notice: Refer to Fastener Notice.
5. Install the nuts to the link bolt assembly.
Tighten the nuts to 23 N.m (17 lb ft).
6. Lower the vehicle.