chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor/Pump Relay, Suspension Control > < Compressor/Pump, Suspension Control|Locations|Page 16506
Page 2
background image

4. Connect the air tube (1) to the air dryer.
5. Connect the electrical connection (2).

Important: Before driving the vehicle, turn the ignition on and wait approximately 45 seconds. This will ensure that the air adjustable shock
absorbers are filled with residual pressure.

6. Lower the vehicle. 

Compressor/Pump Relay, Suspension Control > < Compressor/Pump, Suspension Control|Locations|Page 16506