Avalanche 1500 4WD V8-5.3L (2007)
19. Reset the TAP values. Refer to Transmission Adaptive Functions (TCM).
Transmission Extension Housing Rear Oil Seal Replacement
Transmission Extension Housing Rear Oil Seal Replacement
Tools Required
^
J 21426 Extension Housing Seal Installer
^
J 36850 Transjel Lubricant
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Place a drain pan under the vehicle.
3. Remove the propeller shaft.
4. Remove the case extension housing rear oil seal. Use a flat bladed tool and carefully pry the seal from the housing.
5. Inspect the case extension housing for damage. Replace the extension housing if necessary.
Installation Procedure
1. Lubricate the inside diameter of the new seal with J 36850.
2. Use the J 21426 with a soft faced mallet to install the seal.
3. Install the seal to the extension housing.
4. Install the propeller shaft.
5. Remove the drain pan and lower the vehicle.
6. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Checking.
Filler Tube and Seal Replacement
Filler Tube and Seal Replacement
Removal Procedure
1. Remove the intake manifold.
