Avalanche 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
4. Inspect the rear output shaft bushing for scoring or wear.
5. Remove the rear output shaft bushing if required, using the J 45380 .
^
Install the finger section of the J 45380 in front of the bushing.
^
Install the tube and forcing screw to the finger section. Ensure the forcing screw is backed out.
^
Using a wrench on the forcing screw, remove the rear output shaft bushing.
Installation Procedure
1. Using the J 45380, install a NEW output shaft bushing.
1. Install the bushing or the finger section of the J 45380 .
2. Install the finger section to the main body of the J 45380 .
3. Position the bushing and tool to the case.
4. Using a hammer and the J 45380 , install the bushing.