Avalanche 2500 2WD V8-8.1L VIN G (2002)
8. Remove the armrest, if equipped.
9. Using a flat bladed tool lift the seat cover over the air bag cover.
10. Remove the seat cover to the top of the seat.
11. Disengage the panel fasteners in order to remove the rear cardboard panel.
12. Unclip the head restraint retainers.
13. Remove the bolts which retain the seat belt tower cover.
14. Remove the seat belt tower cover.
15. Pull the seat belt and the seat belt bezel through the opening in the seat cover.
16. Lift the remainder of the seat back cover off the foam pad.
17. Carefully remove the foam pad from the frame.
INSTALLATION PROCEDURE
