Avalanche 2500 2WD V8-8.1L VIN G (2002)
Seat Heater Switch: Service and Repair
Heated Seat Switch Replacement - Front
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Disconnect the electrical connector.
3. Release the retaining clips for the front seat heater switch in order to remove the switch.
4. Remove the front seat heater switch.
INSTALLATION PROCEDURE
1. Install the front seat heater switch to the front trim panel by pressing the switch into place until the switch is completely seated.
2. Connect the electrical connector to the front seat heater switch.
3. Install the front trim panel.
