Avalanche 2500 2WD V8-8.1L VIN G (2002)
Cabin Temperature Sensor / Switch: Service and Repair
INSIDE AIR TEMPERATURE SENSOR REPLACEMENT (OVERHEAD)
REMOVAL PROCEDURE
1. Remove the left windshield garnish molding.
2. Remove the left center pillar assist handle.
3. Remove the left center pillar garnish molding.
4. Remove the left sunshade.
5. Remove the retaining screws from the headliner.
6. Gently pull down the headliner.
7. Remove the inside air temperature sensor from the headliner.
8. Disconnect the electrical connector from the inside air temperature sensor.
9. Remove the inside air temperature sensor from the headliner.
INSTALLATION PROCEDURE
