Avalanche 2500 2WD V8-8.1L VIN G (2002)
1. If equipped with a 8.1 L engine, install the positive battery cable.
2. Install the positive cable to the engine harness clip.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the positive cable clip nut.
Tighten
Tighten the positive cable clip nut to 8 N.m (71 lb in).
4. Install the positive cable to the starter.
5. Install the starter lead nut.
Tighten
Tighten the starter lead nut to 9 N.m (80 lb in).
6. If equipped with a 4.8 L, 5.3 L, or 6.0 L engine, Install the positive battery cable.
7. Install the positive cable to the clip on the oil pan.
8. Install the positive cable clip to the clip on the oil pan.
9. Install the positive cable to the starter.
10. Install the starter lead nut.
Tighten
Tighten the starter lead nut to 9 N.m (80 lb in).