Avalanche 2500 2WD V8-8.1L VIN G (2002)
5. Install a new E-clip to the front half (steering column end) of the cable.
6. Ensure that the transmission manual shaft lever is in the mechanical park position.
7. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
8. Grasp the front half (steering column end) of the transmission cable (1) in the left hand and the rear half (transmission end) of the transmission
cable (2) in the right hand.
9. Align the outside diameter of cable (2) with the inside of the diameter of cable (1).
