Avalanche 2500 4WD V8-8.1L VIN G (2003)
Amplifier: Service and Repair
Amplifier Replacement
REMOVAL PROCEDURE
1. If equipped with a Bose(r) amplifier, remove the radio amp fuse located under the hood electrical center.
2. Remove the floor console bezel.
3. Remove the cupholder.
4. Remove the bolts (1) retaining the console to the I/P.
5. Remove the console storage bin.
6. Remove the center console end panel.
7. Disconnect the audio amplifier electrical connectors.
8. Remove the 4 screws retaining the upper console bracket to the lower console bracket. The front 2 screws (1) are shown in the graphic.