Avalanche 2500 4WD V8-8.1L VIN G (2003)
Rear Door Latch: Service and Repair
Latch Replacement - Door (Cargo Door Lower)
LATCH REPLACEMENT - DOOR (CARGO DOOR LOWER)
REMOVAL PROCEDURE
1. Remove the bolts that retain the latch assembly to the door.
2. Disconnect electrical connector, if required.
3. Remove the actuator cable assembly from the latch.
INSTALLATION PROCEDURE
1. Install the actuator cable assembly to the latch.
2. Connect electrical connector, if required.
3. Install the bolts that retain the latch assembly to the door.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).