Avalanche 2500 4WD V8-8.1L VIN G (2003)
Rear Door Striker: Service and Repair
DOOR STRIKER REPLACEMENT - BODY MOUNTED REAR
REMOVAL PROCEDURE
1. Remove the upper garnish trim panel.
2. Remove the striker screws.
3. Remove the striker.
INSTALLATION PROCEDURE
1. Install the striker to the vehicle.
2. Install the striker screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 25 N.m (18 lb ft).
3. Install the upper garnish trim panel.
