chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Trunk / Liftgate Lock Cylinder > < Latch Replacement - Lift Gate
Page 1
background image

Trunk / Liftgate Latch: Service and Repair
Latch Replacement - Removable Rear Window

LATCH REPLACEMENT - REMOVABLE REAR WINDOW

REMOVAL PROCEDURE

1. Remove the removable window panel.
2. Remove the trim panel (1) along the rear of the headliner.
3. Remove the latch retaining bolts.
4. Disconnect the electrical connector (2) from the latch.
5. Remove the latch from the vehicle.

INSTALLATION PROCEDURE

1. Connect the electrical connector (2) to the latch.
2. Install the latch retaining bolts.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 9 N.m (80 lb in).

3. Install the trim panel (1).
4. Install the removable window panel.

Trunk / Liftgate Lock Cylinder > < Latch Replacement - Lift Gate