Avalanche 2500 4WD V8-8.1L VIN G (2003)
Trunk / Liftgate Striker: Service and Repair
STRIKER REPLACEMENT - MID GATE
REMOVAL PROCEDURE
1. Fold down the rear seats.
2. Remove the rear removable glass panel.
3. Open the midgate to gain access to the striker.
4. Remove the striker bolts.
5. Remove the striker from the vehicle.
INSTALLATION PROCEDURE
1. Install the striker.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Ensure the mounting surface on the body is cleaned and free of any debris.
Tighten
Tighten the striker bolts to 9 N.m (80 lb in).
2. Close the midgate.
3. Inspect for correct operation of the midgate.
4. Install the rear removable rear glass.
5. Return the rear seat to the upright position.
