Avalanche 2500 4WD V8-8.1L VIN G (2003)
8. Push on the seat back cover to ensure the cover is held in place by the velcro.
Armrest Replacement - Rear Seat (60/40 Split)
ARMREST REPLACEMENT - REAR SEAT (60/40 SPLIT)
REMOVAL PROCEDURE
1. Remove the cover to gain access to the center armrest bolts, if equipped.
2. Remove the bolts that retain the center armrest to the seat frame.
3. Remove the center arm rest from the vehicle.
INSTALLATION PROCEDURE
1. Install the center armrest to the seat frame.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to the center armrest.
Tighten
Tighten the bolt to 9 N.m (80 lb in).
3. Install the cover to the center armrest, if removed.