Avalanche 2500 4WD V8-8.1L VIN G (2003)
Arm Rest: Customer Interest
Interior - 2nd Row Seat Center Armrest Panel Warping
File In Section: 08 - Body and Accessories
Bulletin No.: 03-08-50-001
Date: January, 2003
TECHNICAL
Subject:
Second Row Seat Center Armrest Panel Warping
(Replace Panel)
Models:
2003 Cadillac Escalade, Escalade EXT
2003 Chevrolet Avalanche, Silverado Crew Cab, Suburban, Tahoe
2003 GMC Sierra Crew Cab, Yukon, Yukon XL
Condition
Some customers may comment that the second row seat center armrest panel is warped.
Correction
Replace the second row seat center armrest panel using the procedure and part numbers listed below. This new panel is more robust.
1.
Lower the second row seat center armrest.
2.
Remove the two fasteners.
3.
Lift and remove the plastic insert panel from the seat back.
4.
Install the new plastic insert panel by sliding it into the seat back, aligning the mounting holes in the panel with the mounting holes in the seat back
frame.
5.
Install the two new fasteners.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
