Avalanche 2500 4WD V8-8.1L VIN G (2003)
Trim Panel: Service and Repair
Trim Replacement - Third Pillar
TRIM REPLACEMENT - THIRD PILLAR (EXT)
REMOVAL PROCEDURE
1. Remove the rear door sill trim plate.
2. Remove the lower rear seat belt cover and bolt.
3. Remove the trim panel from the vehicle.
INSTALLATION PROCEDURE
1. Install the trim panel to the vehicle.
2. Install the lower seat belt bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 70 N.m (52 lb ft).
3. Install the seat belt cover.
4. Install the rear door sill trim plate.