Avalanche 2500 4WD V8-8.1L VIN G (2003)
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 53 N.m (39 lb ft).
7. Install the side trim plate and screws (1).
Tighten
Tighten the screw to 2 N.m (18 lb in).
8. Install the headrests.
9. Install the seat to the vehicle.
Seat Adjuster Track Cover Replacement - Front
SEAT ADJUSTER TRACK COVER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Unsnap the front tabs, then the rear tabs of the track cover.
3. Remove the track cover from the vehicle.
INSTALLATION PROCEDURE