chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Seat Cover & Pad Replacement - Rear (60/40 Split - 50/50 Split)|Page 22198 > < Seat Cover & Pad Replacement - Rear (60/40 Split - 50/50 Split)|Page 22196

Avalanche 2500 4WD V8-8.1L VIN G (2003)

Page 10
background image

1. Install the track cover on the seat.
2. Snap on the rear tabs, then the front tabs of the track cover.
3. Install the seat in the vehicle.

Seat Cushion Trim Cover and Pad Replacement

SEAT CUSHION TRIM COVER AND PAD REPLACEMENT

REMOVAL PROCEDURE

1. Remove the front nuts (2) on the underside of the seat cushion.
2. Remove the front seat trim panel.

3. Unsnap the lumbar cable (6). Disconnect the lumbar wire harness if equipped with power lumbar.

Seat Cover & Pad Replacement - Rear (60/40 Split - 50/50 Split)|Page 22198 > < Seat Cover & Pad Replacement - Rear (60/40 Split - 50/50 Split)|Page 22196