Avalanche 2500 4WD V8-8.1L VIN G (2003)
8. Pull the rest of the cover down using a side-to-side motion.
9. Install the armrests, if equipped.
10. Install the head restraint retainers.
11. Fit the seat cover around the air bag cover.
12. Install the nut to the lower seat belt anchor.
Tighten
Tighten the nut to 53 N.m (39 lb ft).
13. Install the seat trim panel.
14. Install the head restraints.
15. Push on the seat cover. Ensure that the cover is retained by the Velcro(R) in the seat cushion.
16. Connect the J-strip at the bottom of the seat.
17. If equipped with side air bags, enable the air bag module.
Seat Back Cover Replacement - Rear Folding
SEAT BACK COVER REPLACEMENT - REAR FOLDING
TOOLS REQUIRED
J 34940 Rivet Gun
REMOVAL PROCEDURE