Avalanche 2500 4WD V8-8.1L VIN G (2003)
4. Install the spare tire hoist shaft guide (2) to the bumper.
5. Install the spare tire hoist shaft guide retaining clips to the bumper (1).
IMPORTANT: Inspect the retaining clips to make sure they are not damaged. Replace if necessary
6. Install the spare tire to the hoist.
7. Turn the hoist shaft clockwise until the spare tire is in position and the hoist clicks 2 times or it skips twice. You cannot overtighten the cable.
NOTE: Use only hand tools to lower and raise the spare tire hoist assembly. Do not use air tools. The use of air tools at high speeds will damage the
spare tire hoist assembly.
8. Remove the safety stands.
