Avalanche 2500 4WD V8-8.1L VIN G (2003)
5. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
6. Install the park brake cable to the equalizer bar.
7. Remove the safety stands.
8. Lower the vehicle.
Left Rear - W/O NYS
Park Brake Cable Replacement - Left Rear (without RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
3. Relieve the tension from the park brake cable by pulling down on the cable in front of the equalizer and removing the cable from the equalizer bar.
