Avalanche 2500 4WD V8-8.1L VIN G (2003)
5. Install the generator bracket.
6. Install the generator bracket stud.
Tighten the stud to 20 Nm (15 ft. lbs.).
7. Install the generator bracket bolts and nut.
Tighten the bolts and nut to 50 Nm (37 ft. lbs.).
8. Install the power steering pump.
9. Install the generator.
10. Install the bypass hose.
11. Position the bypass hose clamps at the water crossover and water pump.
12. Install the heater inlet hose to the water crossover.
13. Position the heater inlet hose clamp at the water crossover.
