Avalanche 2500 4WD V8-8.1L VIN G (2003)
Important: Apply the lubricant that comes with J42845 each time the tool is used. Failure to lubricate the J42845 may prevent the balancer from
installing completely.
3. Using J42845 install the balancer.
4. Tighten the J42845 until the crankshaft balancer is completely seated against the crankshaft sprocket.
5. Remove the J42845 from the crankshaft.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
6. Install the crankshaft bolt and washer to the crankshaft.
Tighten the bolt to 255 Nm (189 ft. lbs.).
7. Remove the J42847.
8. Install the starter motor.
9. Install the fan.
10. Install the A/C belt.
