Avalanche 2500 4WD V8-8.1L VIN G (2003)
3. Position the engine mount to engine.
4. Loosely install the engine mount-to-engine bolts.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
5. Tighten the engine mounting bracket through bolts and engine mount-to-engine bolts.
-
Tighten the engine mount bracket through bolts to 75 Nm (55 ft. lbs.)
-
Tighten the engine mount-to-engine bolts to 50 Nm (3.7 ft. lbs.)
6. Install the engine shield and bolts.
Tighten the engine shied bolts to 20 Nm (15 ft. lbs.)
7. Lower the engine.