Avalanche 2500 4WD V8-8.1L VIN G (2003)
3. Position the engine mount to engine (left side shown, right side similar).
4. Loosely install the engine mount-to-engine bolts.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
5. Tighten the engine mount bracket through bolts and engine mount-to-engine bolts.
-
Tighten the engine mount bracket through bolts to 75 Nm (55 ft. lbs.).
-
Tighten the engine mount-to-engine bolts to 50 Nm(37 ft. lbs.).
6. Install the engine shield and bolts.
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
7. Lower the engine.
