Avalanche 2500 4WD V8-8.1L VIN G (2003)
1. Remove the overhead console screw.
2. Remove the overhead console from the headliner.
3. Disconnect the electrical connectors from the auxiliary HVAC control module assembly.
4. Remove the overhead console from the vehicle.
5. Remove the auxiliary HVAC control assembly from the overhead console.
INSTALLATION PROCEDURE
1. Install the auxiliary HVAC control assembly to the overhead console.
2. Connect the electrical connectors to the auxiliary HVAC control module assembly.
3. Install the overhead console to the headliner.
4. Install the overhead console screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screw to 2 N.m (18 lb in).
Rear Auxiliary
REMOVAL PROCEDURE
