Avalanche 2500 4WD V8-8.1L VIN G (2003)
INSTALLATION PROCEDURE
1. Install the lower left air temperature sensor (1) to the HVAC module (2).
2. Connect the electrical connector to the lower left air temperature sensor (1).
Air Temperature Sensor Replacement - Lower Right
REMOVAL PROCEDURE
1. Remove the I/P lower closeout panel.
2. Remove the right floor duct.
3. Remove the center console.
4. Disconnect the electrical connector from the lower right air temperature sensor (1).
5. Remove the lower right air temperature sensor (1).
INSTALLATION PROCEDURE
