Avalanche 2500 4WD V8-8.1L VIN G (2003)
Instrument Panel Bulb: Service and Repair
INSTRUMENT CLUSTER LAMP REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: This procedure calls for the replacement of incandescent bulbs only. The light emitting diodes (LEDs) are not replaceable
individually. If LED replacement is needed, send the cluster to an AC Delco Service Center. Refer to Instrument Panel Cluster (IPC) Replacement.
1. Remove the instrument panel (IP) cluster.
2. Unclip the IP cluster rear cover plate by prying gently on the tabs with a screwdriver.
3. Remove the rear cover plate from the IP cluster.
